3-IN-ONE_® No-Rust Shield_® Instructions

  

1. Keep 3-IN-ONE No-Rust Shield in sealed package until ready to use as unit begins working once removed from seal and exposed to air
   2. Clean your items with a rust remover if they have any rust or corrosion. The 3-IN-ONE No-Rust Shield prevents rust formation on metal and further build up if already present, but will not remove any existing rust & corrosion.
   3. To activate Timestrip_® gauge, press raised button firmly with an edge of a coin. Within 5 minutes of activation a black line will appear above 90-day marker. Strip will turn red indicating when it is time to replace unit. Although the product will last 3 months, the Timestrip indicator may vary with extreme temperatures.
   4. Place the 3-IN-ONE No-Rust Shield in an enclosed space, using one unit for every two cubic feet of space (approximately the size of the average toolbox). For best coverage in larger spaces, place additional units evenly across the enclosed space. For best results keep enclosed space (toolbox, tackle box, etc) closed when possible.
   5. If you wish to stick the unit to a hard surface first clean surface with isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. Remove red liner from 3MTM CommandTM Strip on the back of the unit. Position the unit and press firmly for 30 seconds.
   6. To remove the 3-IN-ONE No-Rust Shield, grab the removal tab and SLOWLY slide the tab straight up along the surface (do not pull away from the surface), stretching the tape at least 6 inches until the 3-IN-ONE No-Rust Shield releases.

Keep out of reach of children.

3M and Command are registered trademarks of 3M.
Timestrip_® is a registered trademark of Timestrip Plc.

- View Product Details
- Buy Now